MOUNTING IMPACT AWNING CANVAS
7
1 - 04.2014
CORRADI SpA - INSTALLATION MANUAL - pERGOTENDA®FLUX
38 di 53
fig. 58 - Mounting canvas awning to the guides
power up the motor with a temporary connection this operation should be carried out by a
specialised technician, see in the “motor and automatism” manual.
Using the remote control provided, move the guide sliders down by approximately 80-90 cm (on
flat awning); up to 100 cm from the end of the lower guide (on tilted awning).
Cut off the power to the motor.
Loosen the nuts on each pin of the sliders in the runners.
Hook up the lifting kits (optional) in correspondence with the position of the sliders.
Lower the bar of each lifting kit to the ground.
Rest the canvas on the bars.
Simultaneously actuate the lifting kits to bring the canvas awning up to the pins on the runners.
100
cm
100
cm
