1 - 04.2014
CORRADI SpA - INSTALLATION MANUAL - pERGOTENDA®FLUX
37 di 53
6 ASSEMBLING IMPACT CANVAS AWNING
fig. 57 – Drilling the canvas
When the canvas has been fixed to the stoppers with all the relative screws, use the special tool (
A
)
to make a cut in correspondence with the hole for the passage of the slider pin (look for the
position half way between the two screws fixing the canvas).
fig. 56 - Manual search for central stopper holes
For the intermediate joints which do not require a plate, drill the canvas after having identified the
hole for the stopper, by pressing with a finger on the canvas in correspondence with the stopper.
