TIN HARDWARE
10
1 - 04.2014
CORRADI SpA - INSTALLATION MANUAL - pERGOTENDA®FLUX
44 di 53
fig. 66
- Rest the wall protection cover (
2
) flush with the fin of component (
1
).
- pre-drill the protection cover and wall with a 4.5 bit at a distance between centres of 100 cm
over the entire length.
- Drill the wall in correspondence with the holes on the protection cover (
3
) and insert suitable
wall plugs, then fasten with the screws and rivet.
- Spread a line of silicon between the roof protective cover and the wall (
4
).
fig. 67
- Rest the front profile (
1
) flush against the inside of the guide.
- Drill the buffer in correspondence with the ridgecaps on the covering buffers, with a ø 4 drill bit
and fix with the supplied rivets (
2
).
2
1
1
2
4
3
