15 di 53
CORRADI SpA - INSTALLATION MANUAL - pERGOTENDA®FLUX
1 - 04.2014
fig. 13
- Insert the water drain flap (
1
), the bracket (
2
) and the foot (
3
) in this order at the bottom of the
upright.
- Screw in the plate (
4
) using the two screws (
5
).
- Fasten it to the upright using the four screws (
6
).
- Repeat the operation on all the uprights.
fig. 14
- Insert the splash profile (
A
) in the inner seats of the lateral guides up to about 14 cm. from the front end.
- Mount the bracket (
1
) on the studs (
2
) present on the guide (front part), then use the nuts provided (
3
) to
position the bracket at 1.5 cm. from the end of the profile.
- Insert the upright (
4
) into the bracket (
1
) on the guide and lock it using the two front screws (
5
).
- pre-tighten the two rear screws (
6
) to the self-locking nuts (
7
) but do not over-tighten.
- Repeat the operation on all guides.
cm
.1,5
cm
.14
1
2
1
5
5
6
6
3
1
4
2
3
6
4
5
7
A
A
A
3 MOUNTING THE GUIDES/UPRIGHTS
