Copystar CS 181, Service Manual

Page: 112 / 355

2KJ/2KH
1-3-72
Original orientation
Sets the default original orientation.
1. Select [Orig. direction] and then press the enter
key.
2. Select [Top Edge Top] or [Top Edge Left] and then
press the enter key.
Auto sleep time
Sets the time that elapses before the auto sleep func-
tion.
1. Select [Sleep mode time] and then press the enter
key.
2. Sets sleep mode type and then press the enter key.
Setting range:
1 to 240 min (Inch specifications)
1 to 120 mim (metric specifications)
Auto low power time
Sets the time that elapses before the low power mode
is automatically activated.
1. Select [Low power time] and then press the enter
key.
2. Sets low power time and then press the enter key.
Setting range:
1 to 240 mm (Inch specifications)
1 to 120 mm (metric specifications)
Copy output destination
Sets the paper output location with priority for copying.
This setting is only available when the optional finisher
or job separator are installed in the machine.
1. Select [Copy Otput Destn] and then press the enter
key.
2. Select output location and then press the enter key.
Fax output destination
Sets where incoming faxes will be ejected. This setting
is only available when the optional fax kit, finisher or
job separator are installed in the machine.
1. Select [Fax Otput Destn] and then press the enter
key.
2. Select output location and then press the enter key.
Default operation mode
Sets whether the display that appears after power is
turned on to the machine will be the one for the copy
operation mode or for the fax operation mode. This set-
ting is only available when the optional fax kit is
installed.
1. Select [Main mode] and then press the enter key.
2. Select [Copy mode] or [Fax mode] and then press
the enter key.
Key sound
Sets whether or not the operation panel will emit a
beep sound each time a key is pressed.
1. Select [Key sound On/Off] and then press the enter
key.
2. Select [On] or [Off] and then press the enter key.
Date and time
Sets the current date and time.
1. Select [Date/Time] and then press the enter key.
2. Sets the current date and time.
3. Select [End] and then press the enter key.
Display contrast adjustment
Adjust the display contrast.
1. Select [Display Contrast] and then press the enter
key.
2. Adjust the contrast and then press the enter key.
Setting range: 1 to 7
Administrator management code change
Changes the administrator management code.
1. Select [Admin. Code] and then press the enter key.
2. Enter a new 4-digit administrator management
code using the numeric keys.
Auto sleep
Sets whether or not to have the auto sleep function.
This setting is displayed only on the inch specification
model.
1. Select [Auto Sleep] and then press the enter key.
2. Select [On] or [Off] and then press the enter key.
Auto clear
Sets whether or not to have the auto clear function.
1. Select [Auto Clear] and then press the enter key.
2. Select [On] or [Off] and then press the enter key.
Auto clear time
Sets the time that elapses from completion of copying
to activation of the auto cler function.
1. Select [Auto Clear Time] and then press the enter
key.
2. Sets the time and then press the enter key. Setting
range: 10 to 270 s
Silent mode
Sets whether or not to use the silent mode which short-
ens the length of time that the laser data writing motor
continues to spin after each copy job is finished.
1. Select [Silent Mode] and then press the enter key.
2. Select [On] or [Off] and then press the enter key.