Cooper Menvier 9752, Installation And Programming Manual

Page: 54 / 96

4. Programming
48 496792
To set Level A do not assign a Keyswitch zone to levels
B, C or D. To set any other level assign the Keyswitch
zone to a single level.
Momentary - KM (Key in 11). Use this zone type to
connect a momentary keyswitch to a single zone.
Fixed - KF (Key in 12). Use this zone type to connect a
fixed position keyswitch to a single zone.
Anti-Mask Zone (AM) (Key in 13). This zone type is for use in Scandina-
via only. Use this zone type for the outputs of detectors
that have an anti mask output facility. Connect the alarm
and contact wiring of the detector to an adjacent zone
(the detector will therefore use two zone’s wiring). This
zone type is active when the system is unset, and during
setting and unsetting. If the zone is violated the control
unit starts a tamper alarm, shows the message “AM
Tamper” on the keypad display, and logs the event as a
zone number with Anti Mask.
Forbikobler (FB) (Key in 14). This zone type is a Scandinavian entry/exit
zone. Use this type on zones connected to stand alone
external keypads or access controllers. The zone oper-
ates as a normal entry/exit zone but when triggered by
the external keypad during the exit time the control unit
stops the exit time and sets the system. If the zone is
triggered while the system is set then the control unit
starts the entry time.
Zone Attributes
Specific zone types can have one or more attributes programmed by the digit
after the zone Command and type. (To remove an attribute, key in the
attribute digit again.)
Chime (C) (Key in
X
1) When enabled by the user, the system gives
a non-alarm warning tone when any zones programmed
as ‘Chime’ are opened. This facility operates only while
the system is unset.
Notes:
1. ‘Chime’ is available only for Normal Alarm, Final Exit, Entry Route and Shock
Analyser zone types.
2. To make chime available from the keypad sounders but not the internal
sounder then program Command 22 with option 0.
Soak Test (S) (Key in
X
2) Use this zone attribute if you want to place
under long term test a detector that you suspect is giving
false alarms. Zones with this attribute are disabled for 14