Cooper Menvier 9752, Installation And Programming Manual

Page: 77 / 96

4. Programming
496792 71
Downloader Telephone Numbers (Commands 118/119)
Use this option to program up to two separate, 31-digit telephone numbers
that the system will use during downloading. When a connection has been
made, the remote PC operator selects the telephone number which the
control unit will call back to (for example home or office).
You can use the A key to insert a pause (four seconds).
To enter a number:
1. Enter programming mode (if you are not already there).
2. Key in 118 (or 119)
Y
at the keypad.
The display shows (for example):
118: DL Tel No 1_
3. Press
Y
.
3. Key in the digits of the number. If necessary press D to move the cursor
to the left to edit or delete the number. Press C to move the cursor to
the right.
The display shows (for example): 118: 1234_
4. Press
Y
.
The system stores the number.
Third Downloader Telephone Number (Commands 120)
Use this option to enable Downloader to use a third callback number (inde-
pendent of Commands 118 and 119). Before the Downloader has made a
connection, the remote PC operator keys in the third callback number and
<Downloader> transmits it to the control unit. The control unit then uses that
number to call back to the remote PC.
Key in Option 0 to disable the third callback number, or option 1 to enable it.
Fast Format Channels (Command 121)
If you selected Fast Format reporting type in Command 103 then you can
use Command 121 to allocate one of the following events to each of the 8
channels:
00 Not used 11 AC Fail
01 Fire 12 Tamper Alarm (Day tamper)
02 PA 13 Open (see note 1)
03 Burglar 14 Close (see note 1)
04 Open/Close 15 Zone Omitted (see note 2)
05 Alarm Abort 16 Medical Assistance
06 Technical Alarm 17 Key Box
07 Alarm Confirmation 18 Anti Mask
08 RF Low Battery 19 Smoke Detector
09 Supervision Loss 20 Comms Acknowledge
10 RF Jamming