Cooper Menvier 9752, Installation And Programming Manual

Page: 81 / 96

4. Programming
496792 75
INTERMEDIATE
Event
SIA Code CID Code
BURG RESTORE BR 130‡
DOWNLOAD SUCCESS RS 412
EXPANDER MISSING RESTORE TR 137‡
EXPANDER TAMPER RESTORE TR 137‡
GLOBAL TAMPER RESTORE TR 137‡
JAMMING XQ 380
KEYBOX CLOSED UR 150
KEYBOX OPEN UA 150
LID TAMP RESTORE TR 137‡
PASSWORD DEFAULTS LOADED RH -
SENSOR TAMPER RESTORE TR 137‡
SOUNDER TAMPER RESTORE TR 137‡
SUPERVISION FAIL BZ 381
SYS TAMPER RESTORE TR 137‡
TAMPER KEYPAD RESTORE TR -
TX BATTERY TROUBLE XT 384
FULL
Event
SIA Code CID Code
AC LOST AT 301
AC RESTORE AR 301‡
AUX RESTORE YQ -
AUX TROUBLE YP -
BATT MISSING YM 311
BATT RESTORED YR 311‡
LOW BATT YT 311
LOW BATT RESTORE YR 311‡
TD (Time and day) RESET JT 625
TELCO1 FAULT LT 351
TELCO1 FAULT RESTORE LR -
USER CODE CHANGED JV -
USER CODE DELETED JX -
Figure 24. SIA Telegram Reports
Send Tamp as Burg (Command 132)
DD243: 2002 states that alarm signals and confirmation signals must be
transmitted using certain codes. In some case these codes do not conform to
Cooper Security Ltd’s implementation of the SIA standard. In addition, some
ARC’s experience problems if a control unit sends “restore” messages using
SIA. The ARC interprets “restores” as “user restores”. When using SIA
reporting Command 132 allows you to program the control unit to send
tampers as alarm, and disable the transmission of “restore” messages.
Option 0 (Default) The control unit sends all SIA messages as specified in
Command 131.
Option 1 For full alarm response the control unit sends tampers as burglary
(BA) and sends Contact ID 130 in place of Contact ID 137. In
addition the control unit does not send: FR (fire restoral), PR
(panic restoral), UR (technical restoral), BR (burglary restoral) or
TR (tamper restoral).
Contact ID Options (Command 143)
If you selected Contact ID in Command 103 then use Command 143 to
select the types of contact ID messages that will be sent.
Option 0 Mode Basic, comprises all the messages with numbers in the
“CID Code” column of Fig 24, with the exception of those marked
with an “‡”.
Option 1 Mode Basic + Restore. With this option the system sends all the
messages with numbers in the “CID Code” column of Fig 24.