manualshive.com logo in svg

Control Techniques FM-3, Reference Manual

The Fostex FM-3 is an exceptional audio mixer with various customizable features. Unlock its full potential by downloading the comprehensive Owner's Manual for free from our website. This manual provides detailed instructions and allows easy access to all the essential information you need for maximizing your audio mixing experience.

Share
Download
background image

247

Diagnostics and Troubleshooting

User Level - The User Level setting is a filter for the parameters that are seen in the Select 
Drive Parameters list.  If set to Easy, the parameters used in most basic applications will be 
seen while the more advanced parameters are hidden.  If set to Detailed, the parameters used 
in more advanced applications will be added to the list.  If set to Too Much, then all 
parameters available in the system will be seen in the list.  This allows the user to select the 
User Level they are most comfortable with to avoid confusion.  If a parameter has been 
selected and the User Level is changed, then the selected parameter will remain selected.

Group - The Group setting allows the user to filter the parameters that are displayed in the 
Select Drive Parameters window by group.  The Group defaults to “ALL” so that parameters 
from all groups are seen.  If the user wishes to only see those parameters from a specific 
group, the click on the Group list box and select the group of parameters they wish to see.

Global Where Am I Button

The Program View, when online and executing a program or sequence of programs, can 
display current  program status. Pressing the Where Am I button on the PowerTools Pro 
toolbar creates a blue triangle that appears on the line of the program currently being 
executed. 

The Global Where Am I can be used for diagnostics. When the user needs to know where in 
a complicated program the drive is or when the user wishes to follow the logical flow of the 
program.

Motion Status

While the drive is online, the name of the program currently running or the motion type 
currently running will appear in the status bar at the bottom left corner of the PowerTools Pro 
screen.

Summary of Contents for FM-3





































































































































































































































































































Reviews:

No comments

Related manuals for FM-3

GE TLE Scalable 150 Quick Start Manual preview
TLE Scalable 150
Brand: GE Pages: 6
GE SIMON XT Instruction Manual preview
SIMON XT
Brand: GE Pages: 3
GE NetworX Series Installation And Start-Up Manual preview
NetworX Series
Brand: GE Pages: 80
GE PACSystems* RX3i Application Manual preview
PACSystems* RX3i
Brand: GE Pages: 39
GE PACSystems* RX3i Secure Deployment Manual preview
PACSystems* RX3i
Brand: GE Pages: 35
GE PACSystems* RX3i Important Product Information preview
PACSystems* RX3i
Brand: GE Pages: 3
GE PACSystems* RX3i User Manual preview
PACSystems* RX3i
Brand: GE Pages: 169
GE PACSystems RX7i Reference Manual preview
PACSystems RX7i
Brand: GE Pages: 317
T-Verter E2 Series Operating Manual preview
E2 Series
Brand: T-Verter Pages: 121
Happy 1050 Installation & Use Instructions preview
1050
Brand: Happy Pages: 10
X Rocker 2.1 Wireless Manual preview
2.1 Wireless
Brand: X Rocker Pages: 38
Ziton ZP1-X3E Series Operation Manual preview
ZP1-X3E Series
Brand: Ziton Pages: 36
IN-COMMAND NCSP35CM Installation And Operation Manual preview
NCSP35CM
Brand: IN-COMMAND Pages: 47
SYCLOPE TRACE'O Manual preview
TRACE'O
Brand: SYCLOPE Pages: 60
Modine Manufacturing Airedale Sentinel Quick Start Manual preview
Airedale Sentinel
Brand: Modine Manufacturing Pages: 2
DAY 72847 Instruction Manual preview
72847
Brand: DAY Pages: 23
YASKAWA Lift Inverter L1000V Technical Manual preview
Lift Inverter L1000V
Brand: YASKAWA Pages: 282
D+H CPS-M1-S Original Instructions Manual preview
CPS-M1-S
Brand: D+H Pages: 36

Brands by name

Popular brands

Load more brands