manualshive.com logo in svg

Control Techniques FM-3, Reference Manual

The Fostex FM-3 is an exceptional audio mixer with various customizable features. Unlock its full potential by downloading the comprehensive Owner's Manual for free from our website. This manual provides detailed instructions and allows easy access to all the essential information you need for maximizing your audio mixing experience.

Share
Download
background image

3

Operational Overview

This section provides a complete functional description of the FM-3. It is intended to provide 
you with a thorough understanding of all operations. The description includes references to 
many FM-3 module and drive parameters which can be displayed and/or edited using 
PowerTools Pro software, or through any Modbus interface. 

The FM-3 module augments the drive by providing the ability to implement programs written 
using PowerTools Pro. When a FM-3 module is attached to an drive, it overrides the operation 
and user accessible features of the drive. The drive’s basic operating modes (Pulse, Velocity 
and Torque) are not available when a FM-3 module is attached.

The FM-3 module stores drive setup parameters within the module itself. This allows you to 
transfer the FM-3 module to another drive without losing setup parameters.

The FM-3 module allows you to set up 55 different indexes, Jog functions and multiple 
Homes. It also provides eight digital input lines and four digital output lines in addition to the 
four input and three output lines available on the drive.

Software Interface

The FM-3 module is set up using PowerTools Pro software. PowerTools Pro is an easy-to-use 
Windows® based setup and diagnostics tool. It provides you with the ability to create, edit 
and maintain your drive’s setup. You can download or upload your setup data to or from a 
device. You can also save it to a file on your PC or print it for review or permanent storage. 

PowerTools Pro Setup Software

PowerTools Pro is designed to be the easiest to use software available for single axis motion 
controllers. 

Features

•

“Hierarchy View” for quick navigation to any setup screen

•

Simple I/O function assignments

•

Powerful online diagnostic capabilities

•

Programming

FM-3 Programming Module Reference Manual

Summary of Contents for FM-3





































































































































































































































































































Reviews:

No comments

Related manuals for FM-3

Canon BU-51H Remote Control Manual preview
BU-51H
Brand: Canon Pages: 2
K&K M15 Manual preview
M15
Brand: K&K Pages: 6
Aalborg DPC Operating Manual preview
DPC
Brand: Aalborg Pages: 128
Barthelme CHROMOFLEX RC Instruction Manual preview
CHROMOFLEX RC
Brand: Barthelme Pages: 8
CAB SHADE User Handbook Manual preview
SHADE
Brand: CAB Pages: 28
C-TEC CAST XFP Commissioning & Programming Quick Start Manual preview
CAST XFP
Brand: C-TEC Pages: 16
C&T Solution MX100 Series User Manual preview
MX100 Series
Brand: C&T Solution Pages: 27
C&K systems SECURIT ST800L+ Installation Manual preview
SECURIT ST800L+
Brand: C&K systems Pages: 16
CALEFFI 543 Series Quick Start Manual preview
543 Series
Brand: CALEFFI Pages: 2
CALEFFI 5350 Series Manual preview
5350 Series
Brand: CALEFFI Pages: 12
Caliber RC20 User Manual preview
RC20
Brand: Caliber Pages: 6
Daikin Madoka User Manual preview
Madoka
Brand: Daikin Pages: 2
Daikin BRC7E530W8 Operation Manual preview
BRC7E530W8
Brand: Daikin Pages: 12
Daikin BRC1H81K Installation And Operation Manual preview
BRC1H81K
Brand: Daikin Pages: 12
Daikin BRC1H71W Operation Manual preview
BRC1H71W
Brand: Daikin Pages: 46
Daikin BRC1D71 Operation Manual preview
BRC1D71
Brand: Daikin Pages: 21
Daikin BRC1D517 Operation Manual preview
BRC1D517
Brand: Daikin Pages: 20
Eaton PKE-COM-RTU Instruction Leaflet preview
PKE-COM-RTU
Brand: Eaton Pages: 2

Brands by name

Popular brands

Load more brands