manualshive.com logo in svg

Control Techniques FM-3, Reference Manual

The Fostex FM-3 is an exceptional audio mixer with various customizable features. Unlock its full potential by downloading the comprehensive Owner's Manual for free from our website. This manual provides detailed instructions and allows easy access to all the essential information you need for maximizing your audio mixing experience.

Share
Download
background image

118

FM-3 Programming Module Reference Manual

Drag In Variables

This icon will bring up the Drag In Variables pop-up window. From this window, the user can 
find any variable they wish to use in a program, and simply drag it into the program code. 
This list will easily allow you to find any of the available pre-defined variables in the FM-3. 
The available parameters shown in the window depends on the selected Program User Level.

Lock Program

Toggling this icon will lock and unlock the program for editing. When locked, the user is not 
able to modify the program code. After downloading, the program automatically locks to 
prevent the user from  inadvertently changing program statements. To unlock the program, 
simply click the icon.

Run This Program

Clicking on this icon will automatically initiate the program that is currently being viewed. 
The drive must first be enabled in order to run a program. (Only available while online)

Program Where Am I?

Clicking on this icon will show the line of the program that is currently being executed. A 
blue arrow will point to the line in the program that was executing when the icon was clicked. 
The arrow will not continue to follow program flow. If the program is not currently running, 
then the arrow will point to the top of the program, or to the last line of the program that was 
processed before it was stopped. (Only available while online) 

Stop All

This icon is the same as the Stop destination found in the assignments screen. Clicking o this 
icon will stop all programs and motion. If in motion, the motor will decelerate to a stop using 
the StopDeceleration ramp value. (Only available while online)

Disable Error Check

This icon can be used to temporarily disable the program parser. The parser is what detects 
errors in a user program. When user programs are very large, the parser can take an 
appreciable amount of time to check the entire program for errors. To avoid this, the user can 

Summary of Contents for FM-3





































































































































































































































































































Reviews:

No comments

Related manuals for FM-3

NCR 1651 Quick Reference Manual preview
1651
Brand: NCR Pages: 6
Kathrein CAP Converter Operating Instructions Manual preview
CAP Converter
Brand: Kathrein Pages: 16
Mackie Remote 48 Brochure preview
Remote 48
Brand: Mackie Pages: 4
Vanderbilt SPCN310 Installation Instruction preview
SPCN310
Brand: Vanderbilt Pages: 2
µ-Dimension D3208 User Manual preview
D3208
Brand: µ-Dimension Pages: 48
µ-Dimension D4006 Installation Instructions preview
D4006
Brand: µ-Dimension Pages: 2
GBD BE24G Installation Instructions Manual preview
BE24G
Brand: GBD Pages: 60
Reliance Foundry R-7651-EM Installation preview
R-7651-EM
Brand: Reliance Foundry Pages: 3
Wesa AE04 Installation And Operation Manual preview
AE04
Brand: Wesa Pages: 8
Fluidmaster 200AM133 Installation Instructions preview
200AM133
Brand: Fluidmaster Pages: 2
Elfa 75-576-22 Manual preview
75-576-22
Brand: Elfa Pages: 22
Tripp Lite SRCOOLNET2LX Installation And Quick Start Manual preview
SRCOOLNET2LX
Brand: Tripp Lite Pages: 40
B meters IWM-TX5 Manual preview
IWM-TX5
Brand: B meters Pages: 2
FAAC B614 Translation Of The Original Instructions preview
B614
Brand: FAAC Pages: 63
ICON ProCon C700 Series Operating Manual preview
ProCon C700 Series
Brand: ICON Pages: 30
Watts bar PKW Translation Of The Original Operating Manual preview
bar PKW
Brand: Watts Pages: 45
Hanbay RD-AC Series User Manual preview
RD-AC Series
Brand: Hanbay Pages: 13
Zehnder Pumpen ENS 1.1 Operating Manual preview
ENS 1.1
Brand: Zehnder Pumpen Pages: 15

Brands by name

Popular brands

Load more brands