Operating Instructions
Single-pole Conductor Rail System
SingleFlexLine Program 0815
BAL0815-0002g-US
www.conductix.us
translated document
page 80 of 128
→
Slide the line feed clamp with the crimped connection cable into both conductor rail ends (see Fig. 97).
Fig. 97: Slide the line feed clamp into the conductor rail ends
→
Slide the end caps (Pos. 4) over both conductor rail ends (see Fig. 98). Ensure that the end cap (Pos. 4) completely encloses
the insulating profile (Pos. 7) (see Fig. 99) and tighten the inner cylinder screw M 4x12 (Pos. 6) in the end cap (Pos. 4) with a
torque wrench Bit 3 mm (torque 2 Nm) (see Fig. 100).
Fig. 98: Slide on end caps (Pos. 4)
4
