Operating Instructions
Single-pole Conductor Rail System
SingleFlexLine Program 0815
BAL0815-0002g-US
www.conductix.us
translated document
page 53 of 128
Fig. 47: Slide the rails onto the connector
Fig. 48: Correct position of the clamp
Fig. 49: Incorrect position of the clamp
Fig. 50: Tighten the connector
Fig. 51: Slide the connector cap over the rail connection
NOTE!
Ensure that the connector cap is completely engaged on both sides of the insulating profile!
Tighten the connector with
a 3-mm Hexagonal screw-
driver to
2 Nm
.
