Operating Instructions
Single-pole Conductor Rail System
SingleFlexLine Program 0815
BAL0815-0002g-US
www.conductix.us
translated document
page 55 of 128
Use the QR code (“click” or “scan”), to watch our animation
Connecting Rails.
During installation, a conductor rail may need to be taken out of a hanger clamp again. There is a disas-
sembly tool for this (Order No.: 081092). This is used to disassemble the conductor rail fixed in the
hanger clamp and end cap bars (see Fig. 54–Fig. 56; see Section 11.2).
Fig. 54: Disassembly tool
Fig. 55: Disassembly tool (side view)
Fig. 56: Disassembly tool in use (side view)
Fig. 57: Disassembly tool in use (front view)
Use the QR code (“click” or “scan”), to watch our animation
Using Dismantling Tool.
