Operating Instructions
Single-pole Conductor Rail System
SingleFlexLine Program 0815
BAL0815-0002g-US
www.conductix.us
translated document
page 72 of 128
→
Hang the expansion module (Pos. 2) in the hanger clamps (see Fig. 82).
Fig. 82: Hang the expansion module in the hanger clamps
→
Carefully tap the expansion module into the clamping unit of the connector (see Fig. 83) with light taps (tool: plastic hammer) and
tighten the socket head screw (Pos. 5) of the clamping unit with the specified torque (torque wrench:
2 Nm
, SW3) (see Fig. 84).
Fig. 83: Tap the expansion module into the clamping unit of the con-
nector with a plastic hammer
Fig. 84: Tighten the cylinder screw of the clamping unit
2
