18
Operator Interface
2583701_C_EN_1812_Nortec-GS_OM
Nortec GS
4.2
Control Software
The control software runs in the background and controls all the functions of the Nortec GS humidifier.
The user interacts with the control software through the screens on the touchscreen display. Details of
the screens are described in the following sections.
Note:
The screens shown in this chapter are for representation purposes only, and may differ from what
is displayed on your humidifier.
4.2.1 Home Screen
When the Nortec GS humidifier is turned on, it starts initializing and performs system checks. When
initialization and system checks are completed successfully, it goes into the normal operating mode.
The Home screen then appears on the touchscreen display.
The major elements of the Home screen are shown in
Figure 6:
2
3
4
5
6
7
8
9
1
10
Home Screen Elements
1 Date and time, current
2 Operating status message – refer to
for details.
3 Humidity control information – shows the type of control signal and the steam output requested.
4 Service/Warning/Fault status message – refer to
"Maintenance and Fault Status" on page 20
for details.
5 Button,
<Help>
– access technical support help information. Refer to
for details.
6 Button,
<Drain>
– manually initiate the drain function. Refer to
"Manually Initiate Tank Draining" on page 47
7 Button,
<About>
– access the system information. Refer to
"System Information" on page 20
for details.
8 Button,
<Main Menu>
– access the Main menu. Refer to
9 Visual indication, current steam output level
10 Model number, Condair humidifier
4.2.2
General Navigational Elements
show the general navigational elements/features of the screens on the touchscreen display.
