KPA Ku-Band Indoor Solid-State Power Amplifier
Revision 1
Ethernet Management
MN/KPA.IOM
6–9
System Account Access Information
•
Read/Write, Read Only and Admin Names and Passwords:
The factory defaults for these names/passwords are:
o
Read Only
monitor/1234
o
Read/Write
opcenter/1234
o
Admin
comtech/comtech
Note the following:
o
These
Name
fields can be any alphanumeric combination with a maximum
length of 10 characters.
o
These
Password
fields can be any alphanumeric combination with a maximum
length of 10 characters.
•
SMTP Server:
Specify the mail server IP address from where e-mail is to be sent.
•
SMTP Domain Name / Destination:
The Administrator can assign the SMTP Domain
Name and Destination. This is required if the e-mail feature of the ‘
Home | Support
’
page (
Sect. 6.5.3.2
) is to be used.
o
For
SMTP Domain Name
, specify the domain of the e-mail server (usually
found to the right of the @ symbol in an e-mail address).
o
For
SMTP Domain Destination
, specify the e-mail recipient name (usually
found to the left of the @ symbol in an e-mail address).
Once the desired configuration settings have been made on this page, click [
Submit Admin]
to
save these changes.
Summary of Contents for KPA series
Page 30: ...KPA Ku Band Indoor Solid State Power Amplifier Revision 1 Installation MN KPA IOM 2 4 Notes...
Page 84: ...KPA Ku Band Indoor Solid State Power Amplifier Revision 1 Appendix A MN KPA IOM A 6 Notes...
Page 124: ...KPA Ku Band Indoor Solid State Power Amplifier Revision 1 Appendix C MN KPA IOM C 30 Notes...
Page 126: ...2114 WEST 7TH STREET TEMPE ARIZONA 85281 USA 480 333 2200 PHONE 480 333 2161 FAX...
