manualshive.com logo in svg

Comtech EF Data KPA series, Installation And Operation Manual

Share
Download
Comtech EF Data KPA series Installation And Operation Manual Download Page 11

 

 

 
 

ix 

PREFACE 

About this Manual 

This manual provides installation and operation information for the Comtech EF Data family of 
Ku-Band Indoor Solid-State Power Amplifiers (ISSPAs) – the KPA-020IN, KPA-040, KPA-080, and 
KPA-100. This is a technical document intended for earth station engineers, technicians, and operators 
responsible for the operation and maintenance of the KPAs. 

Revision 1 of this manual represents a complete rewrite in which all content has been updated in its 
entirety and re-ordered to conform to current Comtech EF Data Technical Publications standards 
and practices. 

Disclaimer 

Comtech EF Data has reviewed this manual thoroughly in order that it will be an easy-to-use 
guide to your equipment. All statements, technical information, and recommendations in this 
manual and in any guides or related documents are believed reliable, but the accuracy and 
completeness thereof are not guaranteed or warranted, and they are not intended to be, nor should 
they be understood to be, representations or warranties concerning the products described.  

Further, Comtech EF Data reserves the right to make changes in the specifications of the products 
described in this manual at any time without notice and without obligation to notify any person of 
such changes. 

If you have any questions regarding your equipment or the information in this manual, please 
contact Comtech EF Data’s Customer Support Department during normal business hours.  

Reporting Comments or Suggestions Concerning this Manual 

Comments and suggestions regarding the content and design of this manual are appreciated. To 
submit comments, please contact the Comtech EF Data Technical Publications department:  

[email protected]

 

Military Standards 

References to “MIL-STD-188” apply to the 114A series (i.e., MIL-STD-188-114A), which 
provides electrical and functional characteristics of the unbalanced and balanced voltage digital 
interface circuits applicable to both long haul and tactical communications. Specifically, these 

Summary of Contents for KPA series































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands