Comtech EF Data KPA series, Installation And Operation Manual

Page: 50 / 126

KPA Ku-Band Indoor Solid-State Power Amplifier Revision 1
Front Panel Operation MN/KPA.IOM
5–8
Select the parameter to configure –
Gateway
,
Address
,
MAC
, or
SNMP
– using the ◄ ► arrow
keys, then press
ENTER
.
If
Ethernet Config: Gateway
is selected:
Ethernet IP Gateway:
192.168.001.002 (
◄ ► ▲ ▼ )
Edit the IP Gateway Address for the Ethernet M&C port for this unit. Use the ◄ ► arrow
keys to select the character to edit, then the ▲ ▼ arrow keys to edit the value of the digit.
Press
ENTER
when done.
If
Ethernet Config: Address
is selected:
Ether IP Address/Range:
192.168.001.002/24(
◄ ► , ▲ ▼ )
Edit the IP Address and Range for the Ethernet M&C port for this unit. Use the ◄ ► arrow
keys to select the character to edit, then the ▲ ▼ arrow keys to edit the value of the digit.
Press
ENTER
when done.
If
Ethernet Config: MAC
is selected:
M&C Port MAC Address:
00-06-B0-00-01-06 (ENTER)
This
read-only
menu shows the unit MAC address. Once the MAC address has been noted,
exit this menu by pressing
ENTER
or
CLEAR.
If
Ethernet Config: SNMP
is selected:
SNMP:
Community Traps (
◄ ► E)
Use the ◄ ► arrow keys to select the parameter to configure:
Community
or
Traps
.
If
SNMP: Community
is selected:
SNMP Community:
Read Write Trap ( ◄ ► E)
Use the ◄ ► arrow keys to select the community to edit:
Read
,
Write
, or
Trap
.
If
SNMP Community: Read
is selected:
Read Community: ( ◄ ► ▲ ▼ E)
public
The user may view or edit the SNMP Read Community string. To edit, first use the ◄
► arrows keys to select the character to edit, then the ▲ ▼ arrows keys to edit that
character. Press
ENTER
when done.
If
SNMP Community: Write
is selected:
Write Community:( ◄ ► ▲ ▼ E)
private