Comtech EF Data CDM-750, Installation And Operation Manual

Page: 219 / 300

CDM-750 Advanced High-Speed Trunking Modem Revision 2
Serial-based Remote Product Management MN-CDM750
7–41
Parameter
Type
Command
(Instruction
& Qualifier)
Number of
Arguments
Description of Arguments
Response to
Command
Query
(Instruction &
Qualifier)
Response to Query
BERT Pattern
Sync
N/A 1 byte, value
of 1 or 2
Query only.
Returns the BER Test Pattern Sync Status in the form x, where:
1 = pattern sync
2 = no pattern sync
N/A RPS? RPS=X
Tx Baseband
Frames per
Modcod
N/A Query only.
Return format for each modcod entry is x.xE+xx with each entry separated by a colon. There are 25 total entries
beginning with modcod 4 (QPSK 1/2 ) and ending with modcod 28 (32APSK 9/10).
N/A ST2? ST2=(see
Description of
Arguments)
Rx Baseband
Frames per
Modcod
N/A Query only.
Return format for each modcod entry is x.xE+xx with each entry separated by a colon. There are 25 total entries
beginning with modcod 4 (QPSK 1/2 ) and ending with modcod 28 (32APSK 9/10).
N/A ST3? ST3=(see
Description of
Arguments)
Rx Baseband
Frames
received with
errors per
Modcod
N/A Query only.
Return format for each modcod entry is x.xE+xx with each entry separated by a colon. There are 25 total entries
beginning with modcod 4 (QPSK 1/2 ) and ending with modcod 28 (32APSK 9/10).
N/A ST4? ST4=(see
Description of
Arguments)
Rx Baseband
Frames
discarded
N/A Query only.
These are baseband frames that are received without errors but are discarded due to the required feature code
not having been purchased. Currently there are two entries separated by a colon. The first entry is for 16 APSK
frames discarded and the second is for 32 APSK frames discarded.
N/A ST5? ST5=(see
Description of
Arguments)