Comtech EF Data CDM-750, Installation And Operation Manual

Page: 111 / 300

CDM-750 Advanced High-Speed Trunking Modem Revision 2
Front Panel Operation MN-CDM750
5–35
5.2.2.8 CONFIG: Remote (Remote Control)
Remote Control=Local Inband
(Local,Serial,Ethernet,Ser+Ethernet) (
v
)
Use the
ST
arrow keys to select Local , Serial, Ethernet , or Ser+Ethernet , or the
W X
arrow keys
to select Inband , and then press ENTER . Note the following:
•
Selecting Local allows monitor and control (M&C) of the unit only through the front panel.
Local control using the front panel is always available, regardless of which
setting is selected on this menu
•
Selecting Serial enables remote EIA ‐ 232/485 or Telnet M&C of the modem.
•
Selecting Ethernet enables remote SNMP, Telnet, or Web Server Interface M&C to the
modem.
•
Selecting Ethernet allows all
methods of remote access to the modem.
5.2.2.8.1 (CONFIG) Remote Control: Serial or Ser+Ethernet
Interface= RS-485-2W (232,485-2,485-4)
Address= 0001 38400 baud (
v
)
Note: Character format is not selectable. It is fixed at 8 ‐ N ‐ 1.
If selecting either Serial or Ser+Ethernet remote control, use the
W X
arrow keys to select
Interface , Address , or (Baudrate) . Then:
•
Interface – Use the
ST
arrow keys to select RS ‐ 232 , RS ‐ 485 ‐ 2W , or RS ‐ 485 ‐ 4W .
•
Address – Note the following:
o
For RS ‐ 232 (aka EIA ‐ 232) – The Address is fixed at 0000 and is not editable.
o
For RS ‐ 485 ‐ 2W or RS ‐ 485 ‐ 4W (aka EIA ‐ 485 2 ‐ Wire or 4 ‐ Wire) – Use the
W X
arrow
keys to select a digit to edit, and then use the
ST
arrow keys to change that digit.
Address 0000 is reserved for universal addressing. The permitted address range is
0001 to 9999.
•
(Baudrate) – Use the
ST
arrow keys to select 2400 , 4800 , 9600 , 19200 , 38400 , or
57600 baud.
Press ENTER when done.