Comtech EF Data CDM-750, Installation And Operation Manual

Page: 200 / 300

CDM-750 Advanced High-Speed Trunking Modem Revision 2
Serial-based Remote Product Management MN-CDM750
7–22
Parameter
Type
Command
(Instruction
& Qualifier)
Number of
Arguments
Description of Arguments
Response to
Command
Query
(Instruction &
Qualifier)
Response to Query
Management
Default
IP Gateway
IPG= 15 bytes
numerical
Command or Query.
Set or return the IP Gateway Address for the Ethernet management port in the form aaa.bbb.ccc.ddd where:
aaa = 000-223
bbb = 000-255
ccc = 000-255
ddd = 001-255
Example: IPG=010.006.030.001.24
IPG=
IPG?
IPG*
IPG#
IPG? IPG=xxx.xxx.xxx.xxx
(see Description of
Arguments)
Management
MAC Address
N/A 12 bytes,
alpha-
numerical
Query only.
Return the unique MAC Address for the modem in the form aabbccddeeff.
Example: MAC=0006B00001C2
N/A MAC? MAC=aabbccddeeff
(see Description of
Arguments)
GE1 Link
Configuration
LC1= 1 byte, value
of 0 thru 6
Command or Query.
Set or return the GE1 Interface mode in the form x, where:
0 = Auto Negotiate (default)
1 = 1000Mbps Full Duplex
2 = 100Mbps Full Duplex
3 = 100Mbps Half Duplex
4 = 10Mbps Full Duplex
5 = 10Mbps Half Duplex
6 = Off
LC1=
LC1?
LC1*
LC1#
LC1? LC1=x
(see Description of
Arguments)
GE2 Link
Configuration LC2= 1 byte, value
of 0 thru 6 Command or Query.
Set or return the GE2 Interface mode in the form x, where:
0 = Auto Negotiate (default)
1 = 1000Mbps Full Duplex
2 = 100Mbps Full Duplex
3 = 100Mbps Half Duplex
4 = 10Mbps Full Duplex
5 = 10Mbps Half Duplex
6 = Off
LC2=
LC2?
LC2*
LC2#
LC2? LC2=x
(see Description of
Arguments)
Gig Optical
Ethernet
Interface
LC3= 1 byte, value
of 0 or 1
Command or Query.
GigE Optical Ethernet Interface mode, where x may be:
0 = Off
1 = On
NOTE: Option must be purchased and SFP module installed!
LC3=
LC3?
LC3*
LC3#
LC3? LC3=x
(see descriptor
arguments)
Inband
Communi-
cations
SLC= 1 byte, value
of 0 or 1 Command or Query.
Set or return isolation (opening) or connection of the SERDES link between the management Ethernet port and
the data Ethernet ports, in the form x, where:
0 = Inband Disabled
1 = Inband Enabled
SLC=
SLC?
SLC*
SLC#
SLC? SLC=x
(see Description of
Arguments)