manualshive.com logo in svg

ComSifter CS-8D Pro, User Manual, Page: 34 / 245

Share
Download
ComSifter CS-8D Pro User Manual Download Page 34

C O N F I G U R I N G   C O M S I F T E R  

User Guide  |  

ComSifter CS-8D Pro

  

3–2 

Security Configuration 

Login 

Upon connection to ComSifter, you will be presented with a login screen.  

 

 

Figure 3-1

: ComSifter Login Screen

 

The default Username is: 

admin

 

The default Password is: 

admin

 

Note:

 

ComSifter will allow five (5) failed login attempts, and then will not allow further 
attempts for 10 minutes. 

 

Note:

 

It is recommended that you immediately change the default password to a 
password of your own choosing as described below. 

 

Note:

 

Administration of the ComSifter may be performed by only one user at a time. 
Any subsequent attempts to login to ComSifter by other users will be rejected. If 
the current user forgets to logout of ComSifter, it may take up to 10 minutes for 
the inactivity timer to logout the previous user. 

Upon successful login, you will be presented with the initial ComSifter display. Refer to 

Maintenance > 

ComSifter Status

 for detailed information about this display. 

Summary of Contents for CS-8D Pro






















































































































































































































































Reviews:

No comments