ComSifter CS-8D Pro User Manual Download Page 29 | Manualshive

Page: 29 / 245

ComSifter CS-8D Pro User Manual Download Page 29

I N S T A L L I N G C O M S I F T E R

User Guide |

ComSifter CS-8D Pro

2–13

Authentication Methods

(Quick Setup)

BASIC Only

Refer to

User Management Utilities > Authentication Method (Step 1) > Authentication Methods Explained >

Basic Only

for more information on the pros and cons, as well as practical applications of this authentication

method.

Prerequisites

Required Data

1. Usernames, passwords, and filter mappings for all users.

Hardware

1. None

Quick Setup

Refer to the section

User Management Utilities

of the User Guide for the following steps.

1.

Select the Authentication Method

. Go to Users > User Management Utilities and select Step 1,

Authentication Method. Once in Authentication Method, select and execute “1-Basic Only (proxy)”

2.

Enter the Usernames and Passwords for the users.

Go to User Management Utilities and select “3b-

Administer/Retrieve Usernames from ComSifter Username Database” Enter the usernames, passwords, and
filter mappings for users that will be filtered.

3.

Automatic Proxy Configuration

. Determine if you will need Automatic Proxy Configuration. Best practices

would suggest setting a Group Policy in the Domain Controller to force browsers into Proxy Mode. Refer to

User Management Utilities > Understanding and Determining Transparent and Proxy Modes > Proxy
Configuration (Group Policy rule)

for an example of this rule. If you do not want to define a Group Policy, then

the browser must be set to proxy mode either manually or using the ComSifter. If you decide to use the
ComSifter, then a prerequisite is that the ComSifter must be supplying DHCP server functionality to your
network. Before continuing, ensure that you have set up DHCP server as described in the Getting Started >
Network worksheet. Once DHCP has been configured properly, then go to User Management and select
“Step 4a-Enable/Disable Automatic Proxy Configuration” and enable and execute automatic configuration.

4.

Edit proxy/WPAD file

.

Optional

. Go to User Management and select “Step 4b-Edit Proxy File

proxy.pac/wpad.dat.” Review and, if necessary, make any changes required for you network.

«
...
27
28
29
30
31
...
»

Summary of Contents for CS-8D Pro






















































































































































































































































Reviews:

No comments