manualshive.com logo in svg

ComSifter CS-8D Pro, User Manual, Page: 130 / 245

Share
Download
ComSifter CS-8D Pro User Manual Download Page 130

C O N F I G U R I N G   C O M S I F T E R  

User Guide  |  

ComSifter CS-8D Pro

  

3–98 

Restart Services  

This command will restart ComSifter's proxy and filter services. This process may take up to 30 seconds and 
will momentarily disrupt client Internet connections. 

Rebuild ComSifter Proxy Cache 

This command will stop Content Filter Service and Proxy Server Service. The Proxy Server cache will be 
completely deleted, rebuilt, and re-indexed. The rebuild will take up to 30 seconds to complete and will disrupt 
client Internet connections. This should only be used if ComSifter Status indicates the service is stopped, 
suspected corruption has appeared on client web pages, or if instructed to do so by Comsift Technical Support. 

Restart ComSifter 

This command will restart ComSifter as if the power were turned off, then on. The restart will take up to two 
minutes to complete and will disrupt client Internet connections. This should only be used if instructed to do so 
by Comsift Technical Support. 

Clear all log files  

All logs will be cleared. During this process, all ComSifter services will be restarted. This will result in up to a 30 
second interruption. 

Clear DHCP Lease Database  

This command will stop the DHCP Server (if running) and will empty the DHCP database. If this ComSifter is 
part of a Non-Stop pair, you must run the same command on the other ComSifter; otherwise, the database will 
be recreated by the Non-Stop function. After clearing both ComSifter DHCP Lease Databases, you must 
manually restart the DHCP Server on each ComSifter. 

Warning:

 

Before executing the Clear DHCP Lease Database command, you should be 
familiar with the results of destroying the lease database while client computers 
have valid leases. 

 

 

 

Summary of Contents for CS-8D Pro






















































































































































































































































Reviews:

No comments