Home
/
ComSifter
/
CS-8D Pro
/
User Manual

ComSifter CS-8D Pro, User Manual, Page: 109 / 245

Share

Page: 109 / 245

ComSifter CS-8D Pro User Manual Download Page 109

C O N F I G U R I N G C O M S I F T E R

User Guide |

ComSifter CS-8D Pro

3–77

Host and Host Groups

Figure 3-83

: Add a New Host

The Add Host feature is used to assign a specific IP within the DHCP scope to a specific client on the network
based on the client’s MAC address. This is useful when the network has clients, such as servers and printers,
that other clients on the network connect to based on IP address. The DHCP server will reserve the IP and
only issue it to the device with the specified MAC address.

The following fields are required.

1. Host Description – This may be a friendly name to help describe the Host.

2. Host Name – Client computer name.

3. Hardware Address – Type must be Ethernet. Enter the MAC address of the client computer. It must be

entered in the format

xx:xx:xx:xx:xx:xx

.

4. Fixed IP Address – The IP address to be assigned to ComSifter.

5. Host Assigned to – Subnet.

Note:

The remaining options are not used in ComSifter and may be left blank (default).

The ADD Host feature may appear to be the proper solution for defining fixed IP devices on a network but best
practices would suggest otherwise. Since the IP is based on the client device MAC address, if the client
computer is changed, thus changing the MAC address, then the settings above would have to be changed. A
better solution would be to define the DHCP range to exclude an area reserved for fixed IP devices.
ComSifters default settings offer such an excluded range as follows:



192.168.1.1–192.168.1.9

Not included in DHCP scope. Use for fixed IP devices.



192.168.1.10–192.168.1.240

Included in DHCP scope. Assigned to clients requesting lease.



192.168.1.241–192.168.1.254

Not included in DHCP scope. Use for fixed IP devices.

«
...
107
108
109
110
111
...
»

Summary of Contents for CS-8D Pro






















































































































































































































































Reviews:

No comments