Home
/
ComSifter
/
CS-8D Pro
/
User Manual

ComSifter CS-8D Pro, User Manual, Page: 125 / 245

Share

Page: 125 / 245

ComSifter CS-8D Pro User Manual Download Page 125

C O N F I G U R I N G C O M S I F T E R

User Guide |

ComSifter CS-8D Pro

3–93

Internet Connection Test

The Internet Connection test is useful for determining if DNS is working properly and ComSifter’s actual
communication speed.

This test will download a compressed graphics file from the Comsift website. If ComSifter is properly connected
to the Internet, the following screen will display.

Figure 3-99

: Internet Connection Test

Each DNS Server, as defined in Network > Network Configuration > DNS will be tested. If DNS passes, then
an Internet Connection Speed will be performed. Upon completion, an average speed will be displayed.

Note:

The above example was the result of a test over a standard 1.5mb DSL
connection.

Note:

ComSifter will try to resolve DNS once, for 5 seconds, for each DNS server. If
unable to reach a DNS server, the speed test will not run and the following
screen will appear indicating DNS failure. This may indicate that ComSifter is
not properly connected to the Internet, DNS settings are invalid, or the Internet
connection is down (due to a modem or router issue, ISP outage, or other
upstream issue).

«
...
123
124
125
126
127
...
»

Summary of Contents for CS-8D Pro






















































































































































































































































Reviews:

No comments