Home
/
ComSifter
/
CS-8D Pro
/
User Manual

ComSifter CS-8D Pro, User Manual, Page: 193 / 245

Share

Page: 193 / 245

ComSifter CS-8D Pro User Manual Download Page 193

U S E R S

User Guide |

ComSifter CS-8D Pro

6–27

Port 113 Exception

For the IDENTD protocol to operate properly, Port 113 TCP must be open in both directions on client
computers. This may be accomplished by making a port exception in the client firewall. If the client computers
are under the control of a Windows 2003 or greater Domain Controller, then this may be easily pushed out with
a Group Policy rule.

Warning:

Identd listens on Port 113 of the client computer. If client computers have
personal firewalls, Port 113 must be opened. If Port 113 is not opened, Internet
access will fail.

Note:

If other local firewall programs are used (e.g. from anti-virus software), the port
113 exception must be made in that firewall instead (usually only one firewall is
allowed to run on a local client). Setting the port 113 exception in alternate
firewalls is outside the scope of this user guide.

Windows Firewall (local rule for XP)

1. Open the Windows Firewall.

«
...
191
192
193
194
195
...
»

Summary of Contents for CS-8D Pro






















































































































































































































































Reviews:

No comments