Compuprint 4247 X03, User Manual

Page: 95 / 200

9. Press ENTER .
An asterisk (*) will be displayed in front of the selected value.
10. Press START or RETURN to exit the Menu. See “Exiting the Configuration
Menu” on page 39.
Printer Compatibility 7 (condensed print)
This parameter is displayed when emulation mode is set to 4247, 4202 III XL, or
2381 Personal Printer.
You can set the printer CPI value for condensed print when a Shift In control is
received from the data stream. For more information, see the
4247 Model X03
Printer Programmer Manual .
You can set this value to:
v
15
v
16.7
v
17.1 (Default)
To change or check condensed print, follow these steps:
1. Press MENU .
2. Press SCROLL/MICRO or SCROLL/MICRO until the printer displays
CONFIGURATION MENU
ASCII Configuration
3. Press ENTER .
4.
Press SCROLL/MICRO or SCROLL/MICRO until the printer displays
ASCII Configuration
Printer Compatibility
5. Press ENTER .
6. Press SCROLL/MICRO or SCROLL/MICRO until the printer displays
Printer Compatibility
7 (Condensed Print)
7.
Press ENTER to display the current value.
8. Press SCROLL/MICRO or SCROLL/MICRO until the desired value for
Condensed Print is displayed.
9. Press ENTER .
An asterisk (*) will be displayed in front of the selected value.
10. Press START or RETURN to exit the Menu. See “Exiting the Configuration
Menu” on page 39.
Printer Compatibility 8 (slashed zero)
You can set this value to:
Disabled
(Default)
All printed zeros will appear without a slash.
Enabled All printed zeros will appear with a slash.
Chapter 7. ASCII Configuration
79