Error messages 149
Audible Beeps
: None
Possible Cause
: The Bootstrap NVRAM on the specified Smart Array controller is corrupt or invalid.
Action
:
1.
Update the controller with the latest firmware version.
2.
If the problem still exists, replace the controller.
1708 - Slot X Drive Array Controller - Bootstrap NVRAM restored from backup.
System restart required
Audible Beeps
: None
Possible Cause
: The specified Smart Array controller Bootstrap NVRAM was restored in one of the following
ways:
•
It was detected as corrupt, and the backup copy was restored.
•
It was automatically updated because a newer version was available.
Action
:
1.
Reboot the server.
2.
If the problem still exists, update the controller to the latest firmware version.
1710-Slot X Drive Array - Non-Array Controller Drives Detected Warning: possible
data loss may occur...
...Physical drive(s) detected which had been previously attached to a non-array controller. Any non-array data on
these drives will be lost unless they are removed. To save data, turn off system power immediately and remove the
drives.
Audible Beeps
: None
Possible Cause
: One or more physical drives were attached to a non-array controller.
Action
: Power down the system, and then remove the drives.
1711-Slot X Drive Array - RAID ADG logical drive(s) configured but Array
Accelerator size <= 32 MB
...This configuration is not recommended. Consider migrating logical drive(s) to RAID 5 or upgrading the Array
Accelerator module.
Audible Beeps
: None
Possible Cause
: This configuration is not recommended.
Action
: Migrate logical drives to RAID 5 or upgrade to a larger array accelerator module.
1711-Slot X Drive Array - Stripe size too large for RAID 5/6 logical drive(s)
...This configuration is not recommended due to transfer buffer usage. Consider migrating to lower stripe size via Array
Configuration Utility.
