Error messages 120
Action
: Update the controller firmware. If the update fails, contact HP support ("
Contacting HP
" on page
187
).
Physical Drive State: The data on the physical drive is being rebuilt.
Action
: No action is required. Normal operations can occur; however, performance will be less than optimal
during the rebuild process.
Physical Drive State: Predictive failure. This physical drive is predicted to fail soon.
Action
: If this drive is part of a non-fault-tolerant configuration, do the following:
1.
Back up all data on the drive.
2.
Replace the drive.
3.
Restore all data to the new drive.
If this drive is part of a fault-tolerant configuration, do not replace this drive unless all other drives in the array
are online.
Physical Drive State: This drive is not supported for configuration...
...and should be disconnected from this controller.
Action
: Replace the physical drive with a drive supported by the controller.
Physical Drive State: SATA drives are not supported for configuration and should be
disconnected from this controller.
Action
: Replace the physical drive with a drive supported by the controller.
Physical Drive State: Single-ported drives are not supported for configuration and
should be disconnected from this controller.
Action
: Replace the physical drive with a drive supported by the controller.
Physical Drive State: This drive contains unsupported configuration data...
...It cannot be used for configuration and should be disconnected from this controller.
Action
: Replace the physical drive with a drive supported by the controller.
Physical Drive State: This drive is not supported for configuration by this version of
controller firmware.
Action
: Replace the physical drive with a drive supported by the controller.
Physical Drive State: This drive is smaller in size than the drive it is replacing...
...It is not supported for configuration and should be disconnected from this controller.
Action
: Replace the physical drive with a larger drive supported by the controller.
Physical Drive State: This drive is unrecognizable...
...It is not supported for configuration and should be disconnected from this controller.
