Error messages 119
Logical drive state: The logical drive is disabled from a SCSI ID conflict.
Action
: Check all SCSI components to make sure they all have a unique SCSI ID.
Logical drive state: The logical drive is not configured.
Action
: Refresh the system using the Array Configuration Utility (on page
72
).
Logical drive state: The logical drive is not yet available.
Action
: No action is required. This logical drive will remain in this state until all expand/shrink or move
operations on this array are completed. All I/O requests sent to the logical drive in this state will be rejected.
Logical drive state: The logical drive is offline from being ejected.
Action
: Reinstall the removed physical drives.
Logical drive state: The logical drive is queued for erase.
Action
: No action is required. Logical drive migrate and extend operations are not possible while the erase
operation is in progress.
Logical drive state: The logical drive is queued for expansion.
Action
: No action is required.
Logical drive state: The logical drive is queued for rebuilding.
Action
: No action is required. Normal operations can occur; however, performance will be less than optimal
during the rebuild process.
Logical drive state: This logical drive has a high physical drive count...
...as well as a high stripe size value such that a controller lock up could occur. It is recommended that the stripe size be
migrated to a lower value.
Action
: Migrate the stripe size to a lower value using the Array Configuration Utility (on page
72
).
NVRAM Error: Board ID could not be read...
...(Read-Only Table failed checksum test). Unrecoverable error.
Action
: Contact HP support ("
Contacting HP
" on page
187
).
NVRAM Error: Bootstrap NVRAM image failed checksum test,...
...but a backup image was found and successfully restored. A system restart is needed.
Action
: Restart the server.
NVRAM Error: Bootstrap NVRAM image failed checksum test...
...and could not be restored. This error may or may not be recoverable. A firmware update might be able to correct the
error.
