I/O Subsystems
4-9
The SRM console command show configuration displays system configuration
information detailing the I/O adapters connected to your system and their status.
Example 4-2 shows a display for an 8400 running either OpenVMS or DIGITAL
UNIX (since XMI and Fu buses are included). The information is displayed
in five columns:
➊
module slot number
➋
module name
➌
module type
➍
module revision
➎
module mnemonic
TLSB information is shown first. There are four modules in the TLSB card cage:
•
Slot 0 - dual-processor CPU module
•
Slot 1 - MS7CC memory module
•
Slot 7 - KFTHA I/O port module
•
Slot 8 - KFTIA I/O port module
When there are multiple modules of a single type, the mnemonics are numbered
consecutively (for example; isp0, isp1, isp2, and isp3).
Information for the KFTIA I/O adapter (slot 8) devices is displayed first. C0
➏
illustrates the internal PCI devices, located in "slots" 0 through 7, excepting slot 3, as
follows:
•
Slots 0 and 1 - two ISP1020s (isp0 and isp1) for FWD (fast wide differential)
SCSI
•
Slots 2 and 6 - two DECchip 21040 (tulip0 and tulip1) twisted-pair Ethernet
•
Slots 4 and 5 - two ISP1020s (isp2 and isp3) for SE (single-ended) SCSI and
FWD SCSI
•
Slot 7 - KFTIA NVRAM daughter card (pci_nvram0)
The Fu PIU, connected to C1 on the KFTIA, has a DWLAA installed in slot 5.
➐
