System Troubleshooting
6-33
Example 6-10 Sample System Hardware Configuration
(Continued)
C4 XMI connected to kftha0 xmi0
➌
1- DWLMA 102A 020A dwlma0
C7 PCI connected to kftha0 pci1
0+ SIO 4828086 0003 sio0
7+ KZPSA 8101 0000 kzpsa0
8+ KZPSA 8101 0000 kzpsa1
A+ DAC960 11069 0000 dac0
Controllers on SIO sio0
0+ DECchip 21040-AA 21011 0000 tulip2
1+ FLOPPY 2 0000 floppy0
2+ KBD 3 0000 kbd0
3+ MOUSE 4 0000 mouse0
EISA connected to PCI0 through sio0 eisa0
➊
The operator enters a show configuration command to show the
system hardware configuration.
➋
The mnemonic for each processor, memory module, I/O adapter, and
I/O subsystem is displayed in this column. You use mnemonics to
identify the subsystem, module, or device you wish to test.
➌
This system has one XMI I/O subsystem and two PCI subsystems; in
the mnemonic column they are identified as xmi0, pci0, and pci1.
To test the xmi0 subsystem, you would issue the command test xmi0.
➍
To test an I/O adapter, such as the Ethernet adapter, you would enter
the command test tulip1.
