6-32
AlphaServer 8200/8400 Operations Manual
6.16 Show Commands
To get system information for OpenVMS or DIGITAL UNIX systems, you can
use the SRM commands show configuration, show network, or show device. The
show command output identifies the subsystem, module, or device you may want
to test. The following sections explain the show command output.
6.16.1 Show Configuration
Enter a show configuration command to display the system hardware
configuration.
Example 6-10 Sample System Hardware Configuration
P00>>> show configuration
➊
Name Type Rev Mnemonic
➋
TLSB
0++ KN7CD-AB 8011 0000 kn7cd-ab0
1++ KN7CD-AB 8011 0000 kn7cd-ab1
2+ MS7CC 5000 0000 ms7cc0
6+ MS7CC 5000 0000 ms7cc1
7+ KFTHA 2000 0D02 kftha0
8+ KFTIA 2020 0000 kftia0
C0 Internal PCI connected to kftia pci0
➌
0+ ISP1020 10201077 0001 isp0
1+ ISP1020 10201077 0001 isp1
2+ DECchip 21040-AA 21011 0023 tulip0
➍
4+ ISP1020 10201077 0001 isp2
5+ ISP1020 10201077 0001 isp3
6+ DECchip 21040-AA 21011 0023 tulip1
7+ PCI NVRAM 71011 0000 pci_nvram0
C1 FBUS connected to kftia0 fbus0
5- DWLAA 2003 0000 dwlaa0 XMI
