![background image](http://html1.mh-extra.com/html/compaq/2500-proliant-64-mb-ram/2500-proliant-64-mb-ram_installation-manual_2645043053.webp)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3-25
Compaq ProLiant 2500 Servers Installation Guide
Writer:
B J Pereira
Project:
Overview of Installing ProLiant 2500 Server and Hardware Options
Comments:
File Name:
F_CH03.DOC
Last Saved On:
8/23/96 2:35 PM
Installing a Processor (CPU)
To install a processor in the processor board, refer to one of the following
installation sources:
■
For a text and illustration procedure, refer to the installation
documentation that came with the option kit.
■
For a text only overview of the procedure, refer to the procedure below.
■
For an illustration overview of the procedure, refer to the Hardware
Installation and Configuration poster included in the shipping box or
to the Processor Board Hood Label located on the inside of the Side
Access Panel.
The processor installation procedure below is text only. To install a processor:
1. If the computer is on, turn it off and disconnect the power cord.
2. Disconnect any other external equipment connected to the computer.
3. Remove the processor board tray.
4. Place the processor board tray, component side up, on a flat surface.
5. Install the new processor using the instructions provided with the
processor option kit or with the Processor Board Hood Label attached to
the inside of the Side Access Panel.
6. Reinstall the processor board tray.
7. Reconnect any external peripherals and the power cord.
8. Turn on the computer.