. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3-2
Overview of Installing ProLiant 2500 Server and Hardware Options
Writer:
B J Pereira
Project:
Overview of Installing ProLiant 2500 Server and Hardware Options
Comments:
File Name:
F_CH03.DOC
Last Saved On:
8/23/96 2:35 PM
6. Set
switches:
processor board switches, system board switches, and
SCSI ID settings, if changes are made.
7. Turn on the computer and insert the SmartStart CD to configure
the server. For SmartStart CD initialization procedures, refer to the
Server Setup and Management pack shipped with your server.
8. Install Compaq Insight Manager to manage the server. For Compaq
Management CD initialization procedures, refer to the Server Setup and
Management pack shipped with your server.
9. Register your server. For server registration information, refer to the
Server Setup and Management pack shipped with your server.
NOTE
: When the server boots from the SmartStart program, it will automatically
start the System Configuration utility. When the utility is completed, you will be
prompted to turn the server off, install any ISA boards (any switch settings required
will be provided by the System Configuration utility), and then boot the server again
from the SmartStart program.
Selecting a Site
Ensure that the installation site you select has the following features:
■
Sturdy, level installation site that includes dedicated and properly
grounded circuits, air conditioning, and static electricity protection
■
3-inch (7.6-cm) clearance at front and back of server for proper ventilation
■
Separate electrical circuit for the server
WARNING:
This equipment is designed for connection to a grounded AC
outlet. The grounding type plug is an important safety feature. To avoid risk
of electric shock or damage to your equipment, do not disable this feature.
CAUTION:
Ensure that the power outlet you plug your power cord into is
easily accessible and is located as close to the equipment operator as
possible. When you need to disconnect power from the equipment, be sure
to unplug the power cord from the power outlet.
