![background image](http://html1.mh-extra.com/html/compaq/2500-proliant-64-mb-ram/2500-proliant-64-mb-ram_installation-manual_2645043036.webp)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3-8
Overview of Installing ProLiant 2500 Server and Hardware Options
Writer:
B J Pereira
Project:
Overview of Installing ProLiant 2500 Server and Hardware Options
Comments:
File Name:
F_CH03.DOC
Last Saved On:
8/23/96 2:35 PM
Removing and Replacing the Processor
Board Tray
The processor board tray holds the processor board and its components:
memory, switches, and connectors. To remove the processor board tray and
locate the processor board:
1. If the computer is on, turn it off and disconnect the power cord.
2. Disconnect any other external equipment connected to the processor
board tray. (Refer to figure below.)
CAUTION:
If a security screw is installed in the side of the processor board
tray, remove the screw before opening the tray.
CAUTION:
To prevent damage to internal wiring, contact your Authorized
Compaq Reseller before using the system board ejector lever.
3. Open the processor board tray.
CZR-007.EPS
2
3
1
System Board
Tray Ejector Lever
Processor Board
Tray Ejector Lever
Figure 3-4.
Removing the Processor Board Tray
4. Remove the tray and turn the tray over to locate the processor board and
its components: processor, memory, switches, and connectors.