. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3-24
Overview of Installing ProLiant 2500 Server and Hardware Options
Writer:
B J Pereira
Project:
Overview of Installing ProLiant 2500 Server and Hardware Options
Comments:
File Name:
F_CH03.DOC
Last Saved On:
8/23/96 2:35 PM
Installing External Storage Devices
Optional mass storage devices can be connected to the Compaq ProLiant 2500
by using the Wide-Ultra SCSI connector on the back of the unit, or the SCSI
ports on the optional Wide-Ultra SCSI Controllers installed.
To install this option, refer to the installation documentation that came with the
external storage device. The following illustration provides only an overview of
this installation.
CZR-034.EPS
Figure 3-20.
Connecting External Mass Storage Devices
Setting System Board and Processor
Board Switches
To set system board and processor board switch settings, refer to one or more of
the following documents:
■
Hardware Installation and Configuration poster shipped in the
Reference Information pack.
■
Processor Board Hood Label located on the inside of the Side Access Panel
■
System Board Hood Label located on the inside of the Top Access Panel
