. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3-20
Overview of Installing ProLiant 2500 Server and Hardware Options
Writer:
B J Pereira
Project:
Overview of Installing ProLiant 2500 Server and Hardware Options
Comments:
File Name:
F_CH03.DOC
Last Saved On:
8/23/96 2:35 PM
Removable Media Drive Bays
All ProLiant 2500 models ship standard with four non-hot-pluggable, removable
media drive bays. The top two bays are occupied with a 3.5-inch diskette drive and
an IDE CD-ROM drive; the bottom two half-height 5.25-inch bays are vacant.
Two half-height removable storage devices such as tape or hard drives can be
installed in the bottom two removable media drive bays. Also, one full-height
storage device such as a DLT tape drive can be installed in the area occupied by
the bottom removable media drive bays. To install a device in this area and to
cable the device, refer to the installation documentation that came with the drive.
The illustrations below provide only an overview of removing the blank panel and
inserting a storage device.
CZR-048.EPS
Figure 3-15.
Removing Blank Panel
