. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3-6
Overview of Installing ProLiant 2500 Server and Hardware Options
Writer:
B J Pereira
Project:
Overview of Installing ProLiant 2500 Server and Hardware Options
Comments:
File Name:
F_CH03.DOC
Last Saved On:
8/23/96 2:35 PM
4. Loosen the top thumbscrew.
5. Slide the Top Access Panel toward the rear of the unit about
0.5 inch (1.5 cm), and then slide the panel to the side of the server.
See Figure 3-2.
6. Lift and remove the panel.
CAUTION:
Do not operate the server with the Top Access Panel removed.
The Top Access Panel is an integral part of the cooling system and removing
it while the system is running may adversely affect data integrity.
CZR-004.EPS
Figure 3-2.
Sliding the Top Access Panel
7. Turn the Top Access Panel over to locate the System Board Hood Label
and the Expansion Board Hood Label.
NOTE:
These hood labels provide instructions on installing expansion boards
and setting system board switches.
8. Set the panel to the side, and locate the system board and expansion
slots inside the chassis.
