INS_CWGE24MS2_REV–
10/05/16 PAGE 205
INSTALLATION AND OPERATION MANUAL
CWGE24MS2
TECH SUPPORT: 1.888.678.9427
Example:
CWGE24MS2#configure terminal
CWGE24MS2(config)#dhcp-snooping enable
CWGE24MS2(config)#dhcp-snooping vlan 1
CWGE24MS2(config)#interface 1/0/1
CWGE24MS2(config-if)#dhcp-snooping trust
Web Configuration
DHCP Snooping
Parameter
Description
State
Select Enable to use DHCP snooping on the Switch. You still have to enable DHCP
snooping on specific VLANs and specify trusted ports.
Note: The Switch will drop all DHCP requests if you enable DHCP snooping and
there are no trusted ports.
Select Disable to not use DHCP snooping.
VLAN State
Select Add and enter the VLAN IDs you want the Switch to enable DHCP snooping
on. You can designate multiple VLANs individually by using a comma (,) and by
range with a hyphen (-).
Select Delete and enter the VLAN IDs you no longer want the Switch to use DHCP
snooping on.
Apply
Click Apply to take effect the settings.
Refresh
Click Refresh to begin configuring this screen afresh.
DHCP Snooping Status
DHCP Snooping State This field displays the current status of the DHCP snooping feature, Enabled or
Disabled.
Enabled on VLAN
This field displays the VLAN IDs that have DHCP snooping enabled on them. This
will display None if no VLANs have been set.
