INS_CWGE24MS2_REV–
10/05/16 PAGE 60
INSTALLATION AND OPERATION MANUAL
CWGE24MS2
TECH SUPPORT: 1.888.678.9427
CLI Configuration
Node
Command
Description
enable
show queue cos-map This command displays the current 802.1p priority mapping to the
service queue.
enable
show qos mode
This command displays the current QoS scheduling mode of IEEE
802.1p.
configure queue cos-map
PRIORITY QUEUE_ID
This command configures the 802.1p priority mapping to the service
queue.
configure no queue cos-map
This command configures the 802.1p priority mapping to the service
queue to default.
configure qos mode high-first
This command configures the QoS scheduling mode to high_first,
each hardware queue will transmit all of the packets in its buffer before
permitting the next lower priority to transmit its packets.
configure qos mode wrr-queue
weights VALUE VALUE
VALUE VALUE VALUE
VALUE VALUE VALUE
This command configures the QoS scheduling mode to Weighted
Round Robin.
interface
default-priority
This command allows the user to specify a default priority handling of
untagged packets received by the Switch. The priority value entered
with this command will be used to determine which of the hardware
priority queues the packet is forwarded to. Default: 0.
interface
no default-priority
This command configures the default priority for the specific port to
default (0).
enable
show diffserv
This command displays DiffServ configurations.
configure diffserv
(disable|enable)
This command disables / enables the DiffServ function.
configure diffserv dscp VALUE
priority VALUE
This command sets the DSCP-to-IEEE 802.1q mappings.
