INS_CWGE24MS2_REV–
10/05/16 PAGE 256
INSTALLATION AND OPERATION MANUAL
CWGE24MS2
TECH SUPPORT: 1.888.678.9427
Community Name:
Parameter
Description
Community String
Enter a Community string, this will act as a password for requests from the
management station.
An SNMP community string is a text string that acts as a password. It is used to
authenticate messages that are sent between the management station (the SNMP
manager) and the device (the SNMP agent). The community string is included in
every packet that is transmitted between the SNMP manager and the SNMP agent.
Rights
Select Read-Only to allow the SNMP manager using this string to collect information
from the Switch.
Select Read-Write to allow the SNMP manager using this string to create or edit MIBs
(configure settings on the Switch).
IP Version
Select the IP version.(IPv4 or IPv6)
Network ID of
Trusted Host
Type the IP address of the remote SNMP management station in dotted decimal
notation, for example 192.168.1.0. or the IPv6 format as 2100::1234.
Mask
Type the subnet mask for the IP address of the remote SNMP
management station in dotted decimal notation, for example
255.255.255.0. or the IPv6 format as FFFF:FFFF:FFFF:FFFF::
Apply
Click Apply to configure the settings.
Refresh
Click Refresh to begin configuring this screen afresh.
Community Name List
No.
This field indicates the community number. It is used for identification only. Click on
the individual community number to edit the community settings.
Community String
This field displays the SNMP community string. An SNMP community string is a text
string that acts as a password.
