manualshive.com logo in svg

Comnet CWGE24MS2, Installation And Operation Manual

Share
Download
Comnet CWGE24MS2 Installation And Operation Manual Download Page 24

INS_CWGE24MS2_REV–

10/05/16     PAGE 24

INSTALLATION AND OPERATION MANUAL 

CWGE24MS2

TECH SUPPORT: 1.888.678.9427

Parameter

Description

Serial Number

The serial number assigned by manufacture for identification of the unit.

Management VLAN This field displays the VLAN ID that is used for the Switch management purposes.

CPU Loading

This field displays the percentage of your Switch’s system load.

Memory Information This field displays the total memory the Switch has and the memory which is currently 

available (Free) and occupied (Usage).

Current Time

This field displays current date (yyyy-mm-dd) and time (hh:mm:ss).

DHCPv6 Client

This field displays whether the DHCPv6 client is enabled on the Switch.

IPv6 Link Local

This field displays the Switch’s link local IP address for IPv6.

IPv6 Default 
Gateway

This field displays the default gateway for IPv6.

IPv6 Global

This field displays the Switch’s global IP address for IPv6.

Refresh

Click this to update the information in this screen.

Summary of Contents for CWGE24MS2



























































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands