INS_CWGE24MS2_REV–
10/05/16 PAGE 263
INSTALLATION AND OPERATION MANUAL
CWGE24MS2
TECH SUPPORT: 1.888.678.9427
Auto Provision
Introduction
Auto provision is a service that service provider can quickly, easily and automatically configure
remote device or doing firmware upgrade at remote side.
» When the Auto Provision is enabled, the Switch will download the auto provision information
file from the auto provision server first.
The file name is followed below naming rule:
Model_Name_Autoprovision.txt
For Example:
CWGE24MS2_Autoprovision.txt
The contents of the file are listed below:
AUTO_PROVISION_VER=1
Firmware_Upgrade_State=1
Firmware_Version=CWGE24MS2-096-1.0.3.S0
Firmware_Image_File=CWGE24MS2-096-1.0.3.S0.fw
Firmware_Reboot=1
Global_Configuration_State=0
Global_Configuration_File=CWGE24MS2-096-1.0.3.S0.save
Global_Configuration_Reboot=0
Specific_Configuration_State=0
Specific_Configuration_Reboot=0
» If AUTO_PROVISION_VER is biggest than current auto provision version, do step 3; otherwise,
wait 24 hours and go back to step 1.
» If the Firmware_Upgrade_State =1, do step 4; otherwise, do step 6.
» If the Firmware_Version is difference than current firmware version, download the Firmware_
Image_File and upgrade firmware.
» If upgrade firmware succeeded and Firmware_Reboot=1, let reboot_flag=1.
» If the Global_Configuration_State =1, download the Global_Configuration_File and upgrade
configuration; otherwise, do step 8.
» If upgrade configutation succeeded and Global_Configuration_Reboot =1, let reboot_flag=1.
» If the Specific_Configuration_State =1, download the specific configuration file and upgrade
configuration; otherwise do step 10. The naming is “Model_Name _” with 12-bit MAC digits,
example for following is “CWGE24MS2_00223b0b8030.txt”
» If upgrade configutation succeeded and Specific_Configuration_Reboot =1, let reboot_flag=1.
» If reboot_flag=1, save running configuration and reboot the switch; otherwise, wait 24 hours
and go back to step 1.
