INS_CWGE24MS2_REV–
10/05/16 PAGE 229
INSTALLATION AND OPERATION MANUAL
CWGE24MS2
TECH SUPPORT: 1.888.678.9427
Parameter
Description
Primary Radius
Server
When RADIUS is selected as the 802.1x authentication method, the Primary Radius
Server will be used for all authentication attempts.
IP Address
Enter the IP address of an external RADIUS server in dotted decimal notation.
UDP Port
The default port of a RADIUS server for authentication is 1812.
Share Key
Specify a password (up to 32 alphanumeric characters) as the key to be shared
between the external RADIUS server and the Switch. This key is not sent over the
network. This key must be the same on the external RADIUS server and the Switch.
Second Radius
Server
This is the backup server used only when the Primary Radius Server is down.
Global Status
State
This field displays if 802.1x authentication is Enabled or Disabled.
Authentication
Method
This field displays if the authentication method is Local or RADIUS.
Guest VLAN
The field displays the guest vlan.
Primary Radius
Server
This field displays the IP address, UDP port and shared key for the Primary Radius
Server. This will be blank if nothing has been set.
Secondary Radius
Server
This is the backup server used only when the Primary Radius Server is down.
Apply
Click Apply to add/modify the settings.
Refresh
Click Refresh to begin configuring this screen afresh.
