INS_CWGE24MS2_REV–
10/05/16 PAGE 76
INSTALLATION AND OPERATION MANUAL
CWGE24MS2
TECH SUPPORT: 1.888.678.9427
Web Configuration
General Settings
Parameter
Description
IGMP Snooping State Select Enable to activate IGMP Snooping to forward group multicast traffic
only to ports that are members of that group. Select Disable to deactivate
the feature.
Report Suppression
State
Select Enable/Disable to activate/deactivate IGMP Snooping report
suppression function.
IGMP Snooping VLAN
State
Select Add and enter VLANs upon which the Switch is to perform IGMP
snooping. The valid range of VLAN IDs is between 1 and 4094. Use a
comma (,) or hyphen (-) to specify more than one VLANs. Select Delete and
enter VLANs on which to have the Switch not perform IGMP snooping.
Unknown Multicast
Packets
Specify the action to perform when the Switch receives an unknown
multicast frame. Select Drop to discard the frame(s). Select Flooding to
send the frame(s) to all ports.
Apply
Click Apply to configure the settings.
Refresh
Click this to reset the fields to the last setting.
IGMP Snooping State This field displays whether IGMP snooping is globally enabled or disabled.
Report Suppression
State
This field displays whether IGMP snooping report suppression is enabled
or disabled.
IGMP Snooping VLAN
State
This field displays VLANs on which the Switch is to perform IGMP snooping.
None displays if you have not enabled IGMP snooping on any port yet.
Unknown Multicast
Packets
This field displays whether the Switch is set to discard or flood unknown
multicast packets.
