Comnet CNGE8FX4TX4MS, Installation And Operation Manual

Page: 42 / 115

36
DMI Commands Set
Command Level Description Example
show dmi I Show DMI port status
(Port 5 to port 8
supports DMI fuction)
switch(config)# interface fastEthernet
5
switch(config-if)# show dmi
VLAN Commands Set
Command Level Description Example
vlan database P Enter VLAN configure
mode
switch#
vlan database
Vlanmode
[portbase| 802.1q |
gvrp]
V
To set switch VLAN
mode.
switch(vlan)# vlanmode portbase
or
switch(vlan)# vlanmode 802.1q
or
switch(vlan)#
vlanmode gvrp
no vlan V No VLAN
Switch(vlan)#
no vlan
Ported based VLAN configuration
vlan port-based
grpname
[Group Name]
grpid
[GroupID]
port
[PortNumbers]
V Add new port based
VALN
switch(vlan)# vlan port-based
grpname test grpid 2 port 2-4
or
switch(vlan)# vlan port-based
grpname test grpid 2 port 2,3,4
show vlan [GroupID]
or
show vlan
V Show VLAN information switch(vlan)# show vlan 23
no vlan group
[GroupID]
V Delete port base group
ID
switch(vlan)#
no vlan group 2
IEEE 802.1Q VLAN
vlan 8021q name
[GroupName]
vid
[VID]
V Change the name of
VLAN group, if the
group didn’t exist, this
command can’t be
applied.
switch(vlan)#
vlan 8021q name test
vid 22
vlan 8021q port
[PortNumber]
access-link untag
[UntaggedVID]
V
Assign a access link for
VLAN by port, if the port
switch(vlan)# vlan 8021q port 3
access-link untag 33