Comnet CNGE8FX4TX4MS, Installation And Operation Manual

Page: 48 / 115

42
[MAC] interface (static)
switch(config-if)#
no
mac-address-table static hwaddr
000012345678
no mac-address-table
filter hwaddr
[MAC]
G
Remove an entry of
MAC address table
(filter)
switch(config)# no mac-address-table
filter hwaddr 000012348678
no mac-address-table G
Remove dynamic entry
of MAC address table
switch(config)# no mac-address-table
SNMP Commands Set
Command Level Description Example
snmp system-name
[System Name]
G Set SNMP agent
system name
switch(config)#
snmp system-name
l2switch
snmp system-location
[System Location]
G Set SNMP agent
system location
switch(config)# snmp system-location
lab
snmp system-contact
[System Contact]
G Set SNMP agent
system contact
switch(config)#
snmp system-contact
where
snmp agent-mode
[v1v2c|v3|v1v2cv3]
G Select the agent mode
of SNMP
switch(config)#
snmp agent-mode
v1v2cv3
snmp
community-strings
[Community]
right
[RO/RW]
G Add SNMP community
string.
switch(config)# snmp
community-strings public right rw
snmp-server host
[IP address]
community
[Community-string]
trap-version
[v1|v2c]
G Configure SNMP server
host information and
community string
switch(config)# snmp-server host
192.168.1.50 community public
trap-version v1
(remove)
Switch(config)#
no snmp-server host
192.168.1.50
snmpv3 context-name
[Context Name ]
G
Configure the context
name
switch(config)# snmpv3 context-name
Test